Roof ventilation profile with pierced arm, outlet edge and welded VWS net.

Plastic profile for long-term ventilation between roof horns in the outer area of ​​the WDVS system.

Product properties:

- Clean the end
- Precise edges
- Easy processing
- Long-term ventilation of the roof

Processing instructions:
Apply the mass of reinforcement in the width of the mesh tape. Then put the profile horizontally and protect it from flooding. The upper edge of the ventilation arm must be positioned thoroughly with the top edge of the horns. The strip mesh is placed in a wet reinforcement layer and coated.

The reinforcing surface with the mesh is then watered and placed to the edge of the plaster (min. 10 cm folded). Reinforcement and upper plaster must be thoroughly sealed with the drain edge.

Roof ventilation profile BT - DBP 01
Article number BT - DBP 01
Length of the rod 2 m
Mesh width 135 mm
Fastening the mesh welded
Packaging unit 25 pcs/box
Packaging content 50 md/box
Packaging unit 40 box/palette
Packaging content 2000 md/palette
Material profile polyvinyl chloride (PVC)

  • Certificate

    All Bautrend products have the appropriate certification documentation required for both the BiH market and the EU countries.