Self-adhesive plastic profile, equipped with welded VWM rain resistant mesh, PE-adhesive tape and bent rebound with self-adhesive tape for fixing protective foils for windows (doors) and frames. The profile is a pure standard profile, the move can not be excluded.

Product features
- Clean processing
- Simplify the processing of the
- Fuge resistant to rain
- No later cleaning jobs
- Reduced audio transmission
- No maintenance
- No additional adhesive tape required
- Treated before isolation

Processing instructions:
All substrates must be flat, dry, clean, anti-adhesive, dust, grease, and suitable for bonding.

It is imperative to perform a test of adhesion

For special surfaces (varnish or powder coats), the substrate must be treated prior to application. In this case, the window and door supplier must be contacted.

Processing temperature + 5 ° C to + 40 ° C.
The arming of the surface with the grid is then followed and led to the edge of the plaster (overlap at least 10 cm).
Arming or finishing must not overlap the fracture of the bent rib, otherwise the bent rim will not be able to separate.