Connection window profile with self-stretched PE 10x1 mm tape and 5mm foam adhesive tape, 12x0.3 mm self-adhesive pull-outs for fastening of protective film, compressed 10mm wide adhesive tape for double-sided adhesive tapes.
Self-adhesive plastic profile (PVC) with 5mm foam adhesive strips, welded VWS mesh and integrated, compressed double-sided adhesive tape for optimum impact stroke and a three-dimensional movement. The profile is fitted with a raincoat and airtight tape, a blue sticky raincoat, rain and air overflow, a blue sticky strap for transport security, as well as a self-stretching strap for fastening the protective foil for windows and doors.
All substrates must be flat, dry, clean of anti-adhesive residues, dust, grease, and suitable for bonding.
It is imperative to perform a test of adhesion.
For special surfaces (varnish or powder coatings), the substrate must be treated before applying the profile. In this case, the window and door supplier must be contacted.
Processing temperature +5 to +40°C.
The arming of the surface with the grid will be submerged and inserted afterwards at the edge of the plaster (at least 10 cm fold).
Arming or posting of the last coat must not exceed the transition to the pull-out, otherwise the same fold will not be removed.