A clever profile with a visible cap and a VWS mesh
Corner profile (PVC) with cap and threaded with glass fiber mesh.
For making sheds on insulated lower sides of balcony, window sill, box for shutters, end joints without profiles etc.
Profile sash 4mm.
- Target rainfall
- Precise Edge Edge
- A visible cutout
- Available pasted corner pieces
The cutter profile is strengthened prior to reinforcement of the surface over the entire surface with the system-related reinforcing mass directly to the superimposed area of the prepared insulating board. In this case, place the reinforcement mass on the insulating board edge and insert the profile. The reinforcement mass should be applied in the mesh ribbon mesh. Then the retention strips are incorporated into the wet reinforcing mass and coat. The glass fiber mesh of the next surface reinforcement must be reduced to the corner area of the curved profile and the integrated glass fiber mesh should be folded approx. 10 cm. The blue protective film is removed only after the finish is completed.
|A wrap-around profile with a visible cap BT - TKP 09|
|Article number||BT - TKP 029|
|Length of the rod||2,5 m|
|Mesh width||refers to the client|
|Fastening the mesh||welded|
|Packaging unit||25 pcs/box|
|Packaging content||62,5 md/box|
|Packaging unit||40 box/palette|
|Packaging content||2500 md/palette|
|Material profile||polyvinyl chloride (PVC)|